Filter
Top Products
Administration
RS400 35 ROS™ v3.5
UTC+5:30 (Calcutta, New Delhi), UTC+5:45 (Kathmandu),
UTC+6:00 (Almaty, Dhaka), UTC+6:30 (Rangoon),
UTC+7:00 (Bangkok, Hanoi), UTC+8:00 (Beijing, Hong Kong)
UTC+9:00 (Seoul, Tokyo), UTC+9:30 (Adelaide, Darwin),
UTC+10:00 (Melbourne, Sydney), UTC+11:00 (Magadan, New Caledonia),
UTC+12:00 (Auckland, Fiji) }
Default: UTC-0:00 (Lisbon, London)
This setting allows for the conversion of UTC (Universal Coordinated Time) to local time.
NTP Server Address
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default:
This parameter specifies the IP address of an (S)NTP server ((Simple) Network Time Protocol);
programming an address of '0.0.0.0' disables SNTP requests. This device is an SNTP client
which allows for only one server. If an server address is programmed then a manual setting of
the time will be overwritten at the next update period.
NTP Update Period
Synopsis: 1 to 1440
Default: 60 min
This setting determines how frequently the (S)NTP server is polled for a time update. If the
server cannot be reached, three attempts are made at one minute intervals and then an alarm is
generated at which point the programmed rate is resumed.