Filter
Top Products
Upgrading Firmware and Managing Configurations
RS400 253 ROS™ v3.5
14.1.3 Upgrading Firmware Using ROS™ TFTP Client
Identify the IP address of the host providing the TFTP server capability. Ensure that the
firmware revision to be downloaded (e.g. ROS-CF52_Main_v3.0.0.bin) is present there.
Telnet to the device or connect to its console port. Enter the CLI shell and run command “tftp
host_addr get main.bin ROS-CF52_Main_v3.0.0.bin”.
Check the status of the download by running the version command.
Alternatively the download could also be started by the rsh command “rsh device_address–l
admin tftp host_addr get main.bin ROS-CF52_Main_v3-0-0.bin”.
Figure 180 Example of an Upgrade using ROS™ TFTP Client
C:\>telnet 10.1.0.1, sign-on and <CTRL S> to enter CLI shell..
>ping 10.1.0.254 1
Reply 1 from 10.0.0.28: time<4ms
Packets: Sent = 1, Received = 1, Lost = 0 (0.00% loss)
Approximate average round trip time in milli-seconds: 4
>tftp 10.0.0.1 get 10.1.0.254 main.bin ROS-CF52_Main_v3.0.0.bin
Transfer successfully completed. Closing file main.bin...
>version
Current ROS-CF52 Boot Software v2.5.0 (May 31 2005 13:56)
Current ROS-CF52 Main Software v2.4.4 (Sep 15 2005 12:01)
Next ROS-CF52 Main Software v3.0.0 (Dec 21 2005 09:04)
>