Agilent Technologies N6700 Welding System User Manual


 
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Responsible Party Alternate Manufacturing Site
Manufacturer’s Name:
Agilent Technologies, Inc. Agilent Technologies (Malaysia) Sdn. Bhd
Manufacturer’s
Address:
550 Clark Drive, Suite 101
Budd Lake, New Jersey 07828
USA
Malaysia Manufacturing
Bayan Lepas Free Industrial Zone, PH III
11900 Penang, Malaysia
Declares under sole responsibility that the product as originally delivered
Product Name:
Modular Power System
Model Numbers:
N6700A, N6700B, N6710A, N6731B, N6732B, N6733B, N6734B, N6735B,
N6736B, N6731A, N6732A, N6733A, N6734A, N6735A, N6741B, N6742B,
N6743B, N6744B, N6745B, N6746B, N6742A, N6743A, N6744A, N6745A,
N6751A, N6752A, N6761A, N6762A, N6701A, N6702A, N6773A, N6774A,
N6775A, N6776A, N6705A, N6753A, N6754A,
Product Options:
This declaration covers all options of the above product(s)
complies with the essential requirements of the following applicable European Directives, and carries the CE
marking accordingly:
Low Voltage Directive (73/23/EEC, amended by 93/68/EEC)
EMC Directive (89/336/EEC, amended by 93/68/EEC)
and conforms with the following product standards:
EMC Standard IEC 61326 :1997+A1 :1998+A2 :2000
EN 61326 :1997+A1 :1998+A2 :2001
CISPR 11:1997 / EN 55011:1998
IEC/EN 61000-4-2:1995+A1:1998 +A2:2001
IEC/EN 61000-4-3:2002
IEC 61000-4-4:1995+A1 :2000 / EN 61000-4-4:1995+A1 :2001
IEC 61000-4-5:1995+A1 :2000 / EN 61000-4-5:1995+A1 :2001
IEC 61000-4-6:1996+A1 :2000 / EN 61000-4-6:1996+A1 :2001
IEC 61000-4-11:1994+A1 :2000 / EN 61000-4-11:1994+A1 :2001
Canada: ICES-001:1998
Australia/New Zealand: AS/NZS 2064.1
Limit
Group 1 Class A
4 kV CD, 8 kV AD
3 V/m, 80-1000 MHz, 80% AM
0.5 kV signal lines, 1 kV power lines
0.5 kV differential, 1 kV common mode
3 Vrms, 0.15-80 MHz, 80% AM
100%/20 ms
The product was tested in a typical configuration with Agilent Technologies test systems.
Safety
IEC 61010-1:2001 / EN 61010-1:2001
Canada: CSA C22.2 No. 1010.1 1992
UL 61010B-1 2003
This DoC applies to above-listed products placed on the EU market after:
March 19, 2007
Date
Bill Darcy
Product regulations manager
For further information, please contact your local Agilent Technologies sales office, agent or distributor,
or Agilent Technologies Deutschland GmbH, Herrenberger Straße 130, D 71034 Böblingen, Germany.
Template: A5971-5302-2, Rev. B.00 {Document number} DoC Revision