Filter
Top Products
Getting Started 3
Series N6700 User’s Guide 45
IP Address This value is the Internet Protocol (IP) address of the instrument. An IP
address is required for all IP and TCP/IP communications with the
instrument. An IP Address consists of 4 decimal numbers separated by
periods. Each decimal number ranges from 0 through 255.
Subnet Mask This value is used to enable the instrument to determine if a client IP
address is on the same local subnet. When a client IP address is on a
different subnet, all packets must be sent to the Default Gateway.
Default
Gateway
This value is the IP Address of the default gateway that allows the
instrument to communicate with systems that are not on the local subnet,
as determined by the subnet mask setting. A value of 0.0.0.0 indicates that
no default gateway is defined.
Name
Select Name to configure the hostname of the instrument. If you want
to change the hostname, you should do so before you connect the
instrument to the network. Otherwise, the original hostname may be
cached in the network for up to several hours.
Host name This field registers the supplied name with the selected naming service. If
the field is left blank, no name is registered. A hostname may contain upper
and lower case letters, numbers and dashes(-). The maximum length is 15
characters. Use the navigation keys to enter an alpha character. Use the
up/down navigation or arrow keys to select a letter from the alphabetic
choices as you scroll through the selections. Use the number keys to enter
a number.
Each power system is shipped with a default hostname with the format: A-
modelnumber-serialnumber, where modelnumber is the mainframe’s 6-
character model number (e.g. N6700B), and serialnumber is the last five
characters of the 10-character mainframe serial number located on the label
on the top of the unit (e.g. 45678 if the serial number is MY12345678).
A-N6700B-45678 is an example of a hostname.
Use Dynamic DNS
naming service
Registers the hostname using the Dynamic DNS naming system.
Use NetBIOS
naming service
Registers the hostname using the RFC NetBIOS naming protocol.
Domain
Select Domain if your DNS server requires an instrument to register
not only the hostname, but also the domain name.
Domain name Registers the Internet domain for the instrument. The Domain must start
with a letter and may contain upper and lower case letters, numbers,
dashes(-) and dots(.). Use the navigation keys to enter an alpha character.
Use the up/down navigation or arrow keys to select a letter from the
alphabetic choices as you scroll through the selections. Use the number
keys to enter a number.