Filter
Top Products
Power Allocation Appendix C
Series N6700 User’s Guide 97
Module Power Allocation
The following commands program the module power limit function:
Front Panel: SCPI Command:
Select Output\Power.
Enter a power limit for each output.
To set a power limit on output 1:
POW:LIM 100,(@1)
To query the power limits that are set, send:
Front Panel: SCPI Command:
Select Output\Power.
The power allocation for all output
channels is displayed in the dialog boxes.
POW:LIM? (@1:4)
To return all output channels to their default settings, you can either
cycle AC power or send the following commands:
Front Panel: SCPI Command:
Select States\Reset
*RST
or
POW:LIM MAX,(@1:4)
NOTE
When an output channel is set to MAX, it returns to its maximum rated value,
and the power limit function will not activate.