Filter
Top Products
Chapter 7 Managing Libraries
Auditing a Library
StorNext User’s Guide 179
• Delete ALL drives associated with the library as described in
Deleting a Tape Drive
on page 190.
1 From the SNSM home page, choose Library > Config Library from
the Admin menu. The Configure Library screen (figure 124
on
page 177) appears.
2 Select from the Select Library list the library you want to delete, and
then click Delete. A message window prompts you to confirm that
you want to delete the library.
3 Click OK to proceed. The Delete Library Status screen appears.
4 After the status screen indicates that the library has been deleted,
click Close.
Auditing a Library
Use this procedure to audit a library. An audit is a physical check of each
library component to verify its integrity and make sure the database and
library are synchronized. Quantum recommends that you audit the
library after each restore.
1 From the SNSM home page, choose Library > Audit Library from the
Admin menu. The Audit Library screen appears.