Filter
Top Products
Chapter 9 Managing Media
Using the SNSM Media Functions
StorNext User’s Guide 229
2 Select from the Source Media Class list the desired source media
class, and then click Browse to select the media IDs you want to
reclassify. The Media Class Browser
window appears.
Figure 174 Media Class
Browser Window
3 Select one or more media from the Select Media list, and then click
OK to return to the Reclassify Media
screen. The IDs for the selected
media are shown in the Entered Media IDs list.
4 Select from the Destination Media Class list a destination for media
IDs, and then click Apply.
The new media class must be associated with the type of media you
are reclassifying. For example, if you select 3590 BACKUP as your
source media class, select 3590 DATA as your destination media
class.
5 After the Status screen informs you that the operation was successful,
click Close.
Caution: Your source and destination media types must be the
same. For example:
Source: F0_3590_DATA
Destination: F0_3590_CLEAN