Filter
Top Products
Chapter 8 Managing Drives and Disks
Working with Tape Drives
StorNext User’s Guide 192
4 After the Status Screen informs you that the drive’s status was
successfully changed, click Close. The Change Drive State screen
shows the changed state for the drive you selected.
5 If desired, repeat steps 2 - 4 to change the state for additional tape
drives.
Cleaning a Tape Drive 8
Use this procedure to manually clean a tape drive.
1 From the SNSM home page, choose Drive > Clean Drive from the
Admin menu. The Clean Drive
screen appears.
Figure 138 Clean Drive Screen
2 Select from the Select Drive List the drive you want to clean, and
then click Apply. The Clean Drive status screen appears.
3 After the Status screen notifies you that the drive has been cleaned
successfully, click Close.
Note: To perform this procedure, you must have at least one
cleaning tape specifically labeled for cleaning. For example,
CLN_XXX.