Filter
Top Products
Chapter 11 Data Migration Management
Modifying a Policy Class
StorNext User’s Guide 260
6 Click Apply.
7 After the Status screen informs you that the operation completed
successfully, click Close.
Modifying a Policy Class
Use the following procedure to modify a policy class.
1 From the SNSM home page, choose Policy Classes from the Admin
menu. The Manage Policy Classes screen (figure 192
) appears.
2 Select from the Select Policy Class list the policy class you want to
modify, and then click Modify. The Modify Parameters screen
(figure 194
) appears.
3 On the Modify Parameters screen, modify values as desired and then
click OK.
4 After the status screen informs you that the policy class has been
successfully modified, click Close.
Deleting a Policy Class
Before you can delete a policy class, you must first delete everything
associated with that policy class, including media and directories. Also,
you must clean the media and return it to a system-blank state.
To remove all files in directories associated with the policy class, follow
these steps:
1. Log on as root.
2. Change directories to the location where the relation resides.
3. Remove all files and directories.