Filter
Top Products
Using the Dynamic Resource Allocation Feature
StorNext User’s Guide 346
For example:
source-LUN-label-name (the original stripe group name) becomes
source-LUN-label-name.old
destination-LUN-label-name (the new stripe group name) becomes
source-LUN-label-name (the same name as the original stripe group)
5 Only if your system includes a standby FSM: After you run
sndiskmove, rescan the disks on the standby FSM’s host by running
cvadmin -e ‘disks refresh’. You must run cvadmin -e ‘disks refresh’ on
all systems on which you have a configured FSM for the file system
involved in the move.
6 Restart the FSM.
7 Only if your system includes a standby FSM: Restart the standby
FSM.
Note: When you run sndiskmove, it could take a considerable
amount of time to copy the data between disks, depending
on disk size and performance.