Filter
Top Products
Note
• Capture is not possible if a time code that is not recorded on the tape is specified as
the In or Out point.
• If the tape is not recorded in the DVCAM format, cue-up of the specified time code
may be impossible. In such a case, use the video device controller to search for the
desired scene, then click the In or Out button to define the In or Out point.
Live REC, REC, and Stop Buttons
The Live REC button immediately starts capture of the video, regardless of the
specified In and Out points (live recording). The REC button starts capturing from the
specified In point to the Out point.
The Stop button stops capturing in either case.
Duration Indication
Shows the AVI file duration calculated from the time codes of the In and Out points in
the non-drop-frame mode. When using a tape recorded in the drop-frame mode, this
indication may not be compatible with the time codes shown by the VCR.
Note
The length of the AVI files used in the BZNP-100 is from five seconds to 150 minutes.
Capturing will automatically stop when the length of the AVI file exceeds 150 minutes.
106