Filter
Top Products
Creating a New Playlist by Listing Playlist Modules
When your playlists are combinations of routine programs, you can create playlist
modules of the programs, and list them to create daily playlists.
The system provides the Edit Playlist (Module List) window for playlists that consist
only of the existing playlist modules. It also allows you to add the external device
control events to the playlist.
Hint
• The Edit Playlist (Module List) window does not allow you to add video, graphics,
or text events. Use the normal Edit Playlist window to add discrete events.
• See "Creating a New Playlist" for details on how to create a playlist module.
1 Select the Playlist tab in the Material Management window, then click [New (Module List)].
The Edit Playlist (Module List) window appears.
2 Select the network player group for which you are creating the playlist from the Destination
drop-down list box.
3 Using a drag & drop operation, add the desired playlist modules from the playlist module list
shown in the left-half of the window to the right playlist, one by one.
The external device control commands are added to the playlist as event lines, in the same
way as in playlist modules. Right-click the line immediately below the location where you
want to insert the external device control event, and select the desired external device
control command on the sub-menu of [Insert Control (External Device)]. You can also
select the desired external device control command on the Control tab of the Material
Management window, then add it using a drag & drop operation. After adding an external
device control event, if necessary, double-click its Start Time column, and adjust the time
for device control.
Edit the playlist as needed. See the explanation in "Editing Functions in the Edit Playlist
(Module List) Window" for details.
4 Click [Properties].
The Properties dialog box appears.
5 In the case of the Scheduling Application, specify the start time of the first event in the Start
Time spin box. (Note that the start time of the first event must be before 24:00:00.) The
network players automatically start playout at the specified time.
When creating a "playlist module" that is to be inserted into other playlists, leave the start
time set at 00:00:00 so as not to specify a start time. Any other start time has higher priority
when a playlist module is inserted into another playlist.
This step is not necessary for the Presentation Application.
Note
The network player does not support a summer time management function. Be careful to
specify the start time if your country uses a summer time system.
6 Check the Repeat check box when you want to repeat playout of playlist, then modify the
daily end time of the repetition in the Repeat End Time spin box, if necessary.
When creating a new "playlist module," check the Playlist Module check box.
Note
Repeated playout is not possible if there is any break in the playlist.
And, in the case of the Scheduling Application, repeated playout will automatically end 10
seconds before the start time of the next playlist.
54