Filter
Top Products
Inserting a Break Event (Presentation Application)
The Presentation Application allows you to insert a break event, a point at which
playout pauses, in the playlist. Playout of the playlist resumes from the event following
to the break event when you start playout using the remote controller of the network
player.
1 Right-click the event that comes immediately after the break, then click [Insert Break] on the
menu.
A break event is inserted. It appears as a gray strip in the playlist. The start time of the
event that is immediately after the break becomes 00:00:00.
Deleting a Break Event
Right-click the break event (gray strip), then click [Delete] on the menu.
Undoing the last Operation
Hold the Ctrl key down and press the Z key to cancel the last operation.
Changing the Start Time of an Event (Scheduling Application)
There are two purposes to changing the start time.
The first is to make a break (during which nothing is played) during playout. The
software always calculates the start time of each event according to the start time of the
first event and the event's duration. Shifting the time displayed in the Start Time
column to a later time makes a break. In this case, the start time of all events on the
same line are simultaneously changed.
The second purpose is to adjust the start time of a single event. In this case, only the
start time of the selected event changes, and no other event is affected.
Changing the Start Time to Make a Break
Note
The start time of an event can be from 00:00:00 to 47:59:59, however, the start time of
the first event in a playlist must be before 24:00:00.
1 Double-click the Start Time column of the event that should be played immediately after the
break.
The start time can now be edited.
2 Add the duration of the break to the current start time, adjust the start time to accommodate
the change, then press the Enter key.
A gray strip that indicates a break appears immediately above the selected event. All the
start times of the subsequent events are recalculated.
Changing the Start Time of the Selected Event Only
Note
This operation adjusts the start time of an event and cannot be used to move the event
on the playlist.
64