Filter
Top Products
Setting Up the NSP-100 Network Players
The system enables you to make the settings for the network players with the BZNP-
100, and transfer the settings to a network player. This is useful when you are using
many network players.
Note
This operation restarts the network player(s). Do not carry out this for the network
player(s) that is/are being used for playout.
1 Click [NSP-100 Setup] on the main menu.
The NSP-100 Setup dialog box appears.
Note
Password entry may be required upon clicking [NSP-100 Setup].
Enter a valid password then click [OK]. This password is defined/modified in the Setup
dialog box.
2 Select the network player or group of network players to transfer the settings to in the
Destination section.
3 Specify or modify the items displayed above [Send] in the dialog box as desired.
See the explanation of the NSP-100 Setup dialog box for details.
4 Click [Send] to transfer the settings to the selected network player or group.
If an error occurs during transfer, an error message appears. When transferring the
settings to the group, click [Transfer Status] on the main menu and find out the network
player which did not receive the settings because of the error.
5 Repeat the procedure for the next network player or group, if necessary.
Copying the Settings of a Network Player or a Group
Select the source network player or group with the Copy from section in the NSP-100
Setup dialog box, then click [Copy].
The settings of the network player or group appear in the dialog box. Modify them, if
necessary, then transfer them to the desired network player or group.
Note
This function copies the settings stored within the BZNP-100, it does not obtain them
from the actual network player or group.
81