Filter
Top Products
1 Right-click the event whose start time should be changed, then click [Change Start Time] on
the menu.
The Change Start Time dialog box showing the current start time appears.
2 Change the start time as desired, then click [OK].
Undoing the last Operation
Hold the Ctrl key down and press the Z key to cancel the last operation.
Positioning Video and/or Text
The system enables you to specify the size (only for video) and position of a video
and/or piece of text displayed on a piece of graphics material.
Note
• When video and text events are played simultaneously on a piece of graphics
material, position the video and text so that they do not overlap. If they are
overlapped, the video material is displayed over the text.
• The unit used in the Display Setup dialog box is pixels, and the origin is the
upperleft corner of the screen. You are not allowed to have more than one user
setting whose value is the same.
If you select the "over-scan" display type upon group setting, the system adjusts the
pre-defined positions, such as "Upperleft" and "Lower," so that the video and text
can be correctly displayed on over-scan displays. The system also indicates the area
that is visible with the over-scan displays on the screen in the Display Setup dialog
box.
Note that if you use both over-scan and under-scan displays in a single network
player group, video and text may not be displayed at the expected position, on some
displays.
Specifying the Default Positions
1 Click [Default Display Setup] in the Edit Playlist window.
The Display Setup dialog box appears.
2 Specify the default positions.
Select the pre-defined settings for the video position, size, and text position, or enter the
desired values in the text boxes.
You can also move or change the size of the text/video on the picture of a monitor
displayed in the Display Setup dialog box to specify the settings.
Check the Preserve Aspect Ratio check box to fix the video aspect ratio at 3:2 (NTSC) or
5:4 (PAL).
3 Click [OK].
The settings are saved as the default and the Display Setup dialog box closes. The new
position settings are automatically specified as the default settings when you add a video
and/or text event to the playlist.
Positioning Each Event
1 Right-click the desired event in the Edit Playlist window, then click [Display Setup] on the
menu.
The Display Setup dialog box appears.
65