Filter
Top Products
NSP-100 Setup Dialog Box
The NSP-100 Setup dialog box enables you to make settings for network players and
transfer those settings to a network player.
It also provides buttons for restarting network players and upgrading firmware. The
control files used on the network players can also be edited and transferred here.
Note
• To do so, first, you must specify the settings related to the network, such as the IP
address, using the remote controller of the network player.
• Sending the settings to the network player(s) or updating the network player(s)
restarts it/them. Do not restart network player(s) that is/are being used for playout.
You can check a network player's status using [NSP-100 Status] on the main menu.
• The dialog box shows the NSP-100 settings managed by the BZNP-100.
Once you decide to use this dialog box to manage the NSP-100 settings, never use
the remote controller of the NSP-100 or the http utility to modify them, because
modifications made using the remote controller or the http utility are not reflected in
this dialog box.
Destination Section
Selects the destination where the settings or the control file should be sent.
To send the settings or the control file to one network player, click [Individual], then
select the network player from the drop-down list box.
To send the settings or the control file to all network players in a certain group, click
[Group], then select the groups from the drop-down list box.
Copy from Section
Selecting a network player or a network player group and clicking the Copy button
displays the settings of the selected network player/group in the dialog box.
This is helpful when using many network players, as you can modify a part of the
settings copied from one network player/group and send them to others.
Note
This function copies settings managed by the BZNP-100, and does not fetch the settings
from the actual network player/group.
Also, you cannot specify the copy source of the configuration file used for external
device control, nor the command list file for the network player here.
Setup Section
Makes settings related to network player operation. Refer to the operating manual of
the network player for details on this section.
Note
Leave all the MENU Screen Setup boxes blank if you do not want to specify any
settings for them.
System Administrator Setup Section
Makes settings related to the administration of the network player. Refer to the
operating manual of the network player for details on this section.
93