Filter
Top Products
Material Management Window - Control Tab
The Material Management window is used to manage the four types of materials, and
the playlists.
The Control tab lists registered control commands used for PDPs (Plasma Display
Panels) or other devices connected to the network players, as well as control commands
for the network players themselves.
Control commands for external devices are included in the events of a playlist to control
external devices along with playout. The control commands for the network players are
used in the urgent playout procedure, and are sent to the network players to be run
there.
List
Displays registered device control commands.
You can sort (ascending order) the device control commands by clicking the title of the
desired column. New device control commands are listed at the bottom.
To modify the type and/or title of a command, double click the desired column, modify
the text, then press the Enter key. To modify or delete a command, right-click the
desired control command and select the desired command from the menu.
The BZNP-100 provides the following control commands for adjusting the audio
volume of the network players. These commands cannot be inserted in the playlists.
To adjust audio volume, select the desired network player group with the Destination
drop-down list box, select the command corresponding to the desired volume, then click
the play button in the Urgent section.
Command Name Function
D0NspAlH Audio level: High
D0NspAlM Audio level: Middle
D0NspAlL Audio level: Low
D0NspAl0 Audio muting
Hint
If an event type or title is longer than the width of the list, and thus it is not fully
displayed, move the mouse pointer over the code, type, or title. The entire text pops up.
New Button
Opens the Edit Control (External Device/NSP-100) dialog box to create a new device
control command.
The BZNP-100 accepts up to 50 device control commands.
Destination Drop-down List Box
Used to specify the destination network player group to which to send the selected
device control command.
Urgent Section (Play Button)
Used for urgent playout in which the selected device control command is sent to the
specified network player group, where it will run on the network players.
Note
The urgent playout function interrupts playout currently being carried out on a network
player. Ongoing playout stops, and the selected control command will run on each
network player.
20