Filter
Top Products
NSP-100 Setup Password
Sets a password used to open the NSP-100 Setup dialog box and modify its settings as
there are some important settings for the network players in the dialog box. To
set/change the password used upon opening the NSP-100 Setup dialog box, enter the
current and new passwords into the respective text boxes. The password is case-
sensitive, and consists of up to eight alphanumeric characters.
Enter the same new password into the New Password and then the Retype New
Password text boxes to avoid specifying a mis-typed password.
To clear the password setting, enter the current password into the Old Password text
box, clear the two text boxes for the new password, then click [OK].
Automatic Sending of Scheduled Playlists (All Groups) Section (Scheduling
Application Only)
Specifies whether the system automatically sends the playlists and the necessary
materials to the network players.
If you do not want to allow automatic sending, select [No Send] in the Mode drop-down
list box. [Send (All Day)] allows the system to send newly created playlists at any time,
whereas [Send (Limited Time)] only allows the system to send them during a specified
period in a day.
To allow automatic playlist sending, specify the retry interval (hours:minutes) in the
Interval text boxes, too, such as "0:30" in the case of retry at a 30 minute interval.
When you select [Send (Limited Time)], specify the time when the system is to send the
playlist, as well.
The Automatic scheduled playlist sending function searches for playlists that contain
events scheduled later than the current time, then compares such playlists on the PC and
the corresponding ones on the network players. Only playlists that have been updated
will be automatically sent to the network player(s).
We recommend you select [Send (Limited Time)], and specify a time such that there is
no conflict with the daily HDD sleep time specified in the NSP-100 Setup dialog box.
Retry for Manual Sending Section
Specifies whether the system automatically re-sends manually sent materials and/or
playlists if an error occurs.
We recommend you select [Yes] in the course of normal operation.
Hint
Regardless of this setting, the system always re-sends the scheduled playlists and
materials sent by the automatic playlist sending function (described above) at the
specified interval, if an error occurs.
Network Setup Button
Opens the Network Setup dialog box to change the detailed parameters related to the
network.
Note
In normal operation, it is not necessary to change the parameters in the Network Setup
dialog box.
Consult your network administrator when changing them, because inappropriate
parameters may make the system unstable.
91