Filter
Top Products
Specifications
1-2
TDS5000B Series Specifications and Performance Verification
Table 1-1: TDS5000B Series models
Model
Number of
channels
Bandwidth
Maximum sample
rate (real time)
TDS5032B 2 350 MHz 5 GS/s
TDS5034B 4 350 MHz 5 GS/s
TDS5052B 2 500 MHz 5 GS/s
TDS5054B 4 500 MHz 5 GS/s
TDS5054BE 4 500 MHz 1 GS/s
TDS5104B 4 1GHz 5 GS/s
Separate Digitizers. Ensure accurate timing measurements with separate digitizers
for each channel. Acquisition on multiple channels is always concurrent and
supports full bandwidth for single-shot acquisitions on each channel. The
digitizers can also be combined to yield a higher sample rate on a single channel.
NOTE. Full bandwidth single-shot acquisition is not available for TDS5104B
Series oscilloscopes, except in one or two channel mode.
Digitizers cannot be combined to yield a higher sample rate for a single channel
when using TDS5054BE Series oscilloscopes.
Fast Acquisition. Acquire up to 100,000 waveforms per second to see rapidly
changing signals or intermittent signal irregularities.
Long Record Lengths. Choose record lengths from 500 points to up to 2,000,000
points per channel (up 8,000,000 points on a single channel). Extend the
maximum record length up to a maximum of 16,000,000 points with memory
options.
Peak Detect Acquisition Mode. See pulses as narrow as 400 ps, even at the slower
time base settings. Peak detect helps you see noise and glitches in your signal.
Acquisition Control. Acquire continuously or set up to capture single shot
acquisitions. Enable or disable optional acquisition features such as equivalent
time or roll mode.
Acquisition Features