Filter
Top Products
Reference
Parameters
Chapter 5
O:\Manuals\E6385A_Cdma\Book\Referenc.fm
114
23. ZZZZ Test Demo Mode [0=normal 1=demo]
This parameter specifies the Test Software operating mode.
• Select 0 to cause the Test Software to operate in normal mode.
• Select 1 to cause the Test Software to operate in demonstration (demo) mode. The
demo mode will allow you to run the tests without really testing or connecting to a
Base Station. This allows you to become familiar with Test Software operation.
For details, see “Demo (Demonstration) Mode” on page 108.
24. BTS Type [1=SII 2=PCS]
This parameter specifies the type of the Base Station to be tested. Select 1 for a
Autoplex Series II Base Station. Select 2 for a PCS Minicell Base Station.