Filter
Top Products
Performing Tests
Automated BBA Test
Chapter 4
O:\Manuals\E6385A_Cdma\Book\perf-tst.fm
66
Automated BBA Test
This test performs a suite of CDMA transmitter tests on the selected BBA. This test
requires that the Test Software send control commands to the MSC.
The test sequence includes the following tests:
• Pilot Channel Tests
Rho
Time Offset
Frequency Error
Carrier Feedthrough
• Code Domain Tests on traffic channels (if CEs are configured)
TX Walsh Code Power
Walsh Code Timing
Walsh Code Phase
Estimated Rho
• Code Domain Tests on pilot and paging channels (active mode)
Parameters and Specifications Used
The following specifications and parameters are used when running this test. See
Chapter 5, “Reference,” for descriptions of the specifications and parameters.
Parameters:
• 5. GN Code Domain Power Threshold
• 6. GN Print Inactive Walsh Codes [0=no 1=yes]
Specifications (Pass/Fail Limits):
• 1. Carrier Feedthrough
• 2. Code Domain Floor
• 3. Code Domain Phase
• 4. Code Domain Timing
• 5. Frequency Error
• 8. Rho
• 9. Time Offset