Filter
Top Products
Reference
Accessing Test Software Functions
Chapter 5
O:\Manuals\E6385A_Cdma\Book\Referenc.fm
96
Figure 5-7 Changing Test Parameters
Select
Position
Press the Menu key to display the
SOFTWARE MENU screen.
If the Test Software is running, press
Shift, Pause/Continue before
pressing Menu.
1
Freq
Parm
Seqn
Spec
Proc
and select it.
Channel Information
Test Parameters
Order of Tests
Pass Fail Limits
Save/Delete Procedure
2
Continue on next page
Select
Position
The TESTS (Test Parameters)
Adjust Power [0=no 1=on f
3
Scroll to Parm #
Select
Position
5
Scroll to Value
screen appears on the display.
and select it.
0.00000
(Entries on the display
might be different.)
4
Scroll to the Parm # to be
Scroll
Select
changed and select it.
15 MDM Flow Control [1=None
(This parameter number and
description are examples.)
and select it.
MDM Flow Control [1=None
15
0.000000
1
before
Scroll to
Parm Test Parameters