Agilent Technologies E6385A Router User Manual


 
Product Description
Required Equipment
Chapter 1
15
Product Description
Required Equipment
Test equipment and other items required for testing are shown in Figure 1-2 and
described in the following paragraphs.
Test Equipment
The Test Software is written specifically to work with the Agilent Technologies 8935
Series E6380A CDMA Base Station Test Set.
Personal Computer (PC)
The Test Set and Test Software support using a PC to control the site via the MSC. This
allows you to dial up or use a telnet connection to log in to the MSC and enter the
maintenance craft shell as you would ordinarily for other cell site operations. The PC is
connected to the Test Set via the SERIAL 9 port. Most PCs with an available serial port
are compatible with the Test Set.
You must install the BTS Laptop Utility program in the PC, so as to relay commands to
the MSC from Test Set, collect test data, log commands sent between the Test Set and
the MSC, and capture screen images.
Cables and Adapters
Various cables and adapters are required. These may be purchased from Agilent
Technologies or from local sources. See “Accessory Kits” on page 17 for information on
optional accessory kits that supply the necessary cables and adapters to connect the Test
Set to the Base Station equipment.