Filter
Top Products
Installation
Navigating the Test Software
Chapter 2
25
Installation
Navigating the Test Software
After the Test Software has loaded, the Lucent CDMA Tests Main Menu screen will
appear on the Test Set display (see Figure 2-3).
Configuration operations, test utilities, and tests are grouped into sub-menus. Turn and
press the knob to access the desired sub-menu.
Figure 2-3 Lucent CDMA Tests Main Menu Screen
Main Menu Functions
• Test Configuration – Define test information used by all tests; such as identifying
the timing reference signal source, measurement port selection, number of averages,
Walsh code power units, cable losses, and Base Station TX Test Port coupling factor.
• Base Station Configuration – Enter the specific cell site and Base Station
information that the Test Software requires to control the Base Station when
communicating with the MSC during tests (after configuring the PC and verifying its
operation).
• Calibration/Utilities – Access procedures used to ensure optimal calibration of
the Test Set and test cables.
• Test Selections – Access the available tests.
• Serial Port Configuration – Access routines used to define the serial port
communication settings for interfacing with the PC serial port.