Filter
Top Products
Reference
Accessing Test Software Functions
Chapter 5
95
Reference
Changing Test Parameters
The Test Software uses parameters to optimize the test environment and conditions for
the testing situation. The default test parameters are determined by examining the test
requirements and specifications from the equipment manufacturer. The Test Software
comes with default settings for all test parameters.
Press the
Menu key, then select the Parm Test Parameters field to display the TESTS
(Test Parameters) screen (see Figure 5-6).
The fields in the TESTS (Test Parameters) screen allow you to change test parameters to
optimize the testing conditions (see Figure 5-7 and Figure 5-8). For information on
saving customized test parameters, see “Saving/Deleting a Procedure” on page 101.
Figure 5-6 TESTS (Test Parameters) Screen
NOTE The TESTS (Test Parameters) screen might not be used in the particular Test Software
package that you are using, or some fields might not be present, depending on the Test
Software application. The message “Access to secure test information denied” will be
displayed if the screen is not supported in the Test Software package.
Selects the parameter
to be changed.
Displays the current
parameter setting.
Parameter description.
The descriptions for the
Test Software might be
different than shown here.