Filter
Top Products
Product Description
Optional Equipment
Chapter 1
19
Product Description
Agilent Technologies E6554A 8935 RF Tools Hardware Accessory Kit
NOTE If you do not purchase the Agilent Technologies E8300A Accessory Kit, you may order
the Agilent Technologies E6554A RF Tools Hardware Accessory Kit to provide all of the
required connectors, cables, and accessories to run the RF Tools tests.
The Agilent Technologies E6554A 8935 RF Tools Hardware Accessory Kit (see Table 1-3)
contains the equipment necessary to run the “Return Loss Measurement” on page 82
and to run the RF Tools ROM programs that reside in the Test Set. Refer to the Agilent
Technologies 8935 CDMA Cellular/PCS Base Station Test Set Reference Guide for more
information about the RF Tools program.
Table 1-3 E6554A 8935 RF Tools Hardware Accessory Kit
Part Part Number Quantity Use
Cable Assembly,
N(M) to N(M), 2-ft.
8120-8687 2 Used to connect the Test Set to the VSWR
bridge.
VSWR Bridge 0955-0829 1 Used to measure return loss
Termination,
50-ohm, N(M)
1250-2656 1 Used to terminate transmission lines.
Termination,
short, N(M)
1250-2655 1 Used to terminate the DUT port of the VSWR
bridge during return loss tests.
Resistive Power Splitter,
2-way
0955-0827 1 Divides one signal into two signals.
Adapter,
BNC(M) to N(F)
1250-0077 2 Connects BNC cables to type N connections.
Attenuator,
N(M) to N(F), 6-dB
0955-0826 2 Used during cable loss, insertion loss, and
return loss tests.
Transit Case E6554-61004 1 Organizes and safely transports kit contents.
Verification Guide E6554-9001 1 Used as a checklist for accessory kit contents.