Filter
Top Products
Reference
Accessing Test Software Functions
Chapter 5
101
Reference
Saving/Deleting a Procedure
A test procedure is a collection of channel information, test parameters, testing order,
and pass/fail limits saved in a file that customizes the Test Software to a specific
application. Ordinarily, procedures are saved on an SRAM card.
Press the
Menu key, then select the Proc Save/Delete Procedure field to display the
TESTS (Save/Delete Procedure) screen (see Figure 5-12).
The fields in the TESTS (Save/Delete Procedure) screen allow you to save or delete
procedures (see Figure 5-13, Figure 5-14, and Figure 5-15). When you save a procedure,
you save channel information, test parameters, pass/fail limits, and testing order, plus a
library that contains the names of all test parameters, pass/fail limits, and tests that are
resident in the Test Software. The library file comes from the Test Software and cannot
be modified. The library file will be automatically saved on the card that is being used to
store the new test procedure.
The process for deleting a procedure is the same as saving a procedure, except that, in
Step13, select the Del Proc field instead.
Figure 5-12 TESTS (Save/Delete Procedure) Screen