Filter
Top Products
Performing Tests
Spectrum Analyzer Test
Chapter 4
69
Performing Tests
Figure 4-7 Spectrum Analyzer Display
Use the Ref Level and Span fields for the best view of the transmitted signal.
Read the marker frequency and level in the upper-right of the display. If you would like
to change the marker position, select the Controls field, select Marker, then use the
Position field.
NOTE Do not make changes to the Center Freq field.
If you would like to view another channel/frequency, return to the Lucent CDMA Tests
Main Menu screen and select the Base Station Configuration field (to access the
Base Station Configuration Menu screen) and change the Channel Number, then re-run
the test.
When you have finished using the spectrum analyzer, press the
Pause/Continue key and
follow the instructions on the display. The Test Software will return to the Test
Selections Menu screen.