Filter
Top Products
Installation
Operating the BTS Laptop Utility Program
Chapter 2
O:\Manuals\E6385A_Cdma\Book\Install.fm
30
Step 5. Select Preferences, then Comm Port Setup.
Step 6. On the Comm Port Setup drop-down window, in the Test Set - Port list, select the port
that the PC will use to communicate with the Test Set, as determined in Step 2.
Step 7. On the Comm Port Setup drop-down menu, in the Test Set - Baud Rate list, select
the data transfer rate at which the PC will communicate with the Test Set, as
determined in Step 1. This value will not automatically adjust during the session. The
recommended baud rate for the Test Set is 19200.