Installation
Operating the BTS Laptop Utility Program
Chapter 2
O:\Manuals\E6385A_Cdma\Book\Install.fm
28
System Requirements for BTS Laptop Utility Program
If the PC does not meet the following minimum system requirements, this could cause
erratic operation and longer test times.
• 166-MHz Pentium
Processor
• 16 megabytes of RAM
• Windows® 95, Windows 98, or Windows NT 4.0 (Intel based)
• Available RS-232 serial port
• Internal modem
Installing the BTS Laptop Utility Program
The BTS Laptop Utility program comes compressed on two install diskettes for easy
setup on the PC. Simply insert the first diskette into the drive, select Start then Run,
then type A:\Setup. The install shield will lead you through the installation process (see
Figure 2-5).
Figure 2-5 Installing the BTS Laptop Utility Program