Filter
Top Products
Product Description
Optional Equipment
Chapter 1
O:\Manuals\E6385A_Cdma\Book\Proddesc.fm
18
Agilent Technologies E8300A Option 001 Accessory Kit
The E8300A Option 001 Accessory Kit (see Table 1-2) includes the additional parts that
are required to run all of the Test Set built-in RF Tools routines. The RF Tools routines
are automated measurements used in cell site maintenance (such as antenna sweeps).
Attenuator,
N(M) to N(F), 6-dB
0955-0819 2 Used for cable loss calibration routines.
Adapter,
SMA(F) TO N(M)
1250-1250 2 Used for Base Station TX Test Port Cable
calibration, adapts to a Type N attenuator.
Adapter,
N(F) to N(F)
1250-0777 1 Used for joining Type N cables
Adapter,
TNC(M) to N(F)
1250-2361 1 Used for TNC connections on some Base
Stations.
Velcro Cable Wrap 1400-2157 10 Used for securing and organizing cables for
transporting and during testing.
Verification Guide E8300-90001 1 Used as a checklist for connector kit
contents.
Transit Case E8300-61006 1 Organizes and transports connectors and
cables. Includes spaces for Option 001 parts.
Strain Relief Assembly E8300-61004 2 Reduces strain on connectors from cables.
Strain Relief Application Guide E8300-90005 1 Instructions for using strain relief
assemblies.
Table 1-1 E8300A Base Station Accessory Kit Contents
Part Part Number Quantity Use
Table 1-2 E8300A Option 001 Accessory Kit Contents
Part Part Number Quantity Use
Cable Assembly,
N(M) to N(M), 2-ft.
8120-8687 2 Used to connect the Test Set to the VSWR
bridge.
VSWR Bridge 0955-0829 1 Used to measure return loss
Termination,
50-ohm
,
N(M)
1250-2656 1 Used to terminate transmission lines.
Termination,
short, N(M)
1250-2655 1 Used to terminate the DUT port of the
VSWR bridge during return loss tests.
Resistive Power Splitter,
2-way
0955-0827 1 Divide a signal in two.