Filter
Top Products
Installation
Loading and Running the Test Software
Chapter 2
23
Installation
Loading and Running the Test Software
Locate the PC card labeled “Agilent Technologies E6385A Lucent CDMA Base Station
Test Software” and follow the steps outlined in Figure 2-1 and Figure 2-2.
Figure 2-1 Loading and Running the Test Software
Turn the power on. (The power switch
is located above the power cord
connection on the right-side panel.)
1
2
Wait until the first test
screen is displayed
(about 45 seconds).
- - - -
3
Insert the Test Software card.
Menu
Preset.
Press
4