Filter
Top Products
Performing Tests
Overview
Chapter 4
O:\Manuals\E6385A_Cdma\Book\perf-tst.fm
52
Overview
NOTE Testing might be interrupted if cell site diagnostics are initiated by the MSC while tests
are being run. To prevent this, use a personal computer (PC) (usually a laptop PC) to
send a command to inhibit diagnostics from the MSC before testing.
These test procedures describe the process from setting up a test to obtaining test
results. To simplify the procedures, all are written to use a PC to communicate with the
MSC (where applicable) and the Test Software will be set to send control commands.
Before making measurements, verify that you have performed the following setup and
configuration processes:
• “Loading and Running the Test Software” on page 23.
• “Operating the BTS Laptop Utility Program” on page 27.
• “Connecting the PC to the Test Set and the MSC” on page 32.
• “Configuring the Test Software” on page 38.
• “Establishing a Connection with the MSC for Testing” on page 43.