Filter
Top Products
Reference
Accessing Test Software Functions
Chapter 5
99
Reference
Figure 5-10 Changing Pass/Fail Limits
SOFTWARE MENU screen.
If the Test Software is running, press
Shift, Pause/Continue
before
pressing Menu.
Freq
Parm
Seqn
Spec
Proc
Channel Information
Test Parameters
Order of Tests
Pass/Fail Limits
Save/Delete Procedure
and select it.
The TESTS (Pass/Fail Limits)
screen appears on the display.
1
(Disregard this number.)
Continue on next page
1
Press the Menu key to display the
Select
Position
2
Select
Position
3
Scroll to Spec #
and select it.
Select
Scroll
4
Scroll to the desired Spec #
and select it.
Select
Position
5
Scroll to Lower Limit
and select it.
6
(This Spec # is an example.)
Output Power Adjustment
--1.000000
1.000000
6
Output Power Adjustment
--1.000000
1.000000
Scroll to Spec Pass/Fail Limits