Filter
Top Products
7. 20 AMP, 115 VOLT DUPLEX RECEPTACLES:
Connection point for supplying 115 volt power to
operate one or two electrical devices.
8. 50 AMP, 230/115 VOLT RECEPTACLE:
Connection point for supplying 230 volt power to
operate one electrical device.
9. WELD OUTPUT TERMINAL (TO WORK) WITH
FLANGE NUT: Provides the connection point for
the work cable.
10. WELD OUTPUT TERMINAL (TO ELECTRODE
HOLDER) WITH FLANGE NUT: Provides the
connection point for the electrode holder.
11. GROUND STUD: Provides a connection point for
connecting the machine case to earth ground for
the safest grounding procedure.
12. 14 PIN AMPHENOL: For attaching wire feeder
control cables to the RANGER 10-LX. (Includes
contactor closure circuit, remote control circuit,
wire feeder 115/42 volt power source.)
13. 6 PIN AMPHENOL: For attaching optional remote
control equipment to the RANGER 10-LX.
(Includes contactor closure circuit & remote con-
trol circuit.)
14. VOLTMETER – Displays actual voltage at the out-
put terminals when welding in CV-mode.
OPERATION
B-5 B-5
RANGER 10-LX
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC