Lincoln Electric SVM120-A Welder User Manual


 
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC
TROUBLESHOOTING & REPAIR
F-35 F-35
RANGER 10-LX
WARNING
ENGINE THROTTLE ADJUSTMENT TEST
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 216-383-2531 or 1-800-833-9353 (WELD).
TEST DESCRIPTION
If the machine output is low, this test will determine whether the engine is operating at the
correct speed (RPM) during both HIGH and LOW idle conditions. Directions for adjusting the
throttle to the correct RPM are given.
MATERIALS NEEDED
5/16” Nut driver
3/8” Nut driver
1/2” wrench
10mm wrench
7/16” wrench
Strobe-tach, frequency counter, or oscilloscope
Chalk