Filter
Top Products
Rev. B
Workman 200 Spray System Page 3.1 -- 3 Sonic Boom System (Optional Kit)
Special Tools
Diagnostic Display
The Diagnostic Display (Fig. 1) can beconnected to the
Sonic Boom wire harness communication connector to
verifycorrectelectricalfunctionsoftheSonicBoomSys-
tem. Electroniccontrol unit(ECU) inputsand outputsfor
theSonic BoomSystem canbecheckedusing theDiag-
nostic Display.
Toro Part Number for Diagnostic Display: 85--4750
Toro Part Number for Overlay (English): 94--8604
IMPORTANT: The Diagnostic Display must not be
left connected to the machine. It is not designed to
withstand the environment of the machine’s every
day use. When use of Diagnostic Display is com-
pleted, disconnect it from the machine and recon-
nect loopback connector to wire harness
communication connector. Machine will not oper-
ate without loopback connector installed on wire
harness. Store Diagnostic Display in a dry, secure,
indoor location a nd not on machine.
Figure 1
Figure 2