Filter
Top Products
99
Dukane Manual Part No. 403–566–01
Section 9 – Utilities Menu
Copy A Setup
Starting from the Utilities menu in Figure 9–4,
move the cursor down to Copy A Setup and press
the ENTER key. The display first requests the
source file number. This is shown in Figure 9–8.
COPY FROM
1#
Use the increment and/or decrement key to select
a source file and press the ENTER key. Next the
display requests a destination for the file as shown
in Figure 9–9. Again, use the increment and/or dec-
rement key to select a destination and press the
ENTER key.
COPY TO
2#
The display will ask for confirmation before pro-
ceeding. This screen is shown in Figure 9–10.
OK TO COPY SETUP?
NO
YES
To proceed, move the cursor down to YES and press
the ENTER key. The file is copied and the display
returns to the Setup Utilities selection menu shown
in Figure 9–4.
Erase Setups
Again, starting from the Utilities menu in Figure
9–4, move the cursor down to Erase Setups and
press the ENTER key. The menu gives us a choice
to erase the current setup or to erase all setups.
This menu is shown in Figure 9–11.
ERASE SETUPS
ERASE CURRENT SETUP
ERASE ALL SETUPS
The current setup is the one chosen from the Se-
lect Setup menu. Press the enter key, and the menu
prompts you with a confirmation messages indi-
cating the setup to be deleted. This is shown in
Figure 9–12.
ERASE SETUP #1
NO
YES
To erase the indicated setup, move the cursor down
to YES and press ENTER. The display will display
the message that the setup is being erased (Figure
9–13) and return to the Process Setup menu (Fig-
ure 9–2). Leaving the cursor at NO and pressing
ENTER will still return you to the Process Setup
menu (Figure 9–2).
ERASING SETUP
IN PROCESS...
Figure 9–8 Source File Location Entry
Figure 9–9 Destination File Location Entry
Figure 9–10 Confirm Copy Files
Figure 9–11 Erase Setups Selection Menu
Figure 9–12 Confirm Erase Selected Setup
Figure 9–13 Erase Setup In Process