Filter
Top Products
35
Dukane Manual Part No. 403–566–01
Section 4 – Controls & Displays
Process Control Menu Display
The menu display is a backlit 4–line LCD with 20
characters per line. The top line of the display con-
tains the menu title (with a few exceptions).
Selection Menus
The selection menus have a triangular cursor at
the far right of the display. These menus may also
be thought of as a decision menu. Move the cursor
to the menu choice and press the ENTER key to
select your choice. Pressing the CANCEL key re-
turns to the previous selection menu. A typical se-
lection menu is shown in Figure 4–9.
PROCESS CONTROL
WELD MODE
HOLD TIME
AFTERBURST
Confirmation Menus
A confirmation menu requests a Yes or No entry
to continue the process. Select YES from the menu
and press the ENTER key to proceed. A typical con-
formation menu is shown in Figure 4–10.
RESET PART COUNT
NO
YES
Data Entry Menu
The data entry screens have the parameter name
on the first line and the parameter value on the
third line. Use the left and right triangle keys to
select the digit and the Increment (+) and Decre-
ment (–) keys to change the value. Press the
EN-
TER
key to accept the value. A typical data entry
screen is shown in Figure 4–11.
WELD TIME
0.750 SEC
Figure 4–9 Typical Selection menu
Figure 4–11 Typical Data Entry Screen
Figure 4–10 Typical Confirmation Screen