Filter
Top Products
19 – 9
Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 1.8.5153
Figure 19-6. Confi guration Screen - Page 6
I/O Confi guration
If any additional I/O card are added to Vission 20/20, this
is where these cards are enabled for use by the Vission
20/20 algorithms. Some feature of the Vission 20/20 will
not be available unless specifi c expansions cards are se-
lected, see Figure 19-6. Confi guration Screen - Page 6.
Digital Output 1:
• Not editable by the operator. Identifi es that the
Digital Output card 1 is enabled.
Digital Output 2:
• Not editable by the operator. Identifi es that the
Digital Output card 2 is enabled.
Digital Input 1:
• Not editable by the operator. Identifi es that the
Digital Input card 1 is enabled.
Digital Input/Output 1:
• Enables the optional digital input/output card 1
Digital Input/Output 2:
• Enables the optional digital input/output card 2
Analog Input 1:
• Not editable by the operator. Identifi es that the
Analog Input card 1 is enabled.
Analog Input 2:
• Not editable by the operator. Identifi es that the
Analog Input card 2 is enabled.
Analog Input 3:
• Enables the optional Analog input card 3.
Analog Input 4:
• Enables the optional Analog input card 4.
Analog Output:
• Enables the optional Analog Output card.
Section 19 • Configuration