Filter
Top Products
2 - 2
EZConfig Client
You can use the EZConfig Client tool to scan and decode bar codes generated by EZConfig Editor on the workstation.
For details on scanning configuration bar codes, see EZConfig Client beginning on page 5-1.
EXM Files
The EXM file format is an XML format customized for Dolphin terminals that is comprised of sections that may include child
sections and keys. Keys contain the values that configure the terminal. The EXM file format supports a multi-level, hierarchical,
tree structure. The terminal reads the highest-level section first and then reads the key values in each section. EXM files replace
INI files for Power Tools and terminal configuration settings. If both an INI file and an EXM file are present for the same
application, a warning message displays at startup and the terminal uses the EXM. Remove the INI file from the terminal to
avoid the warning message.
EXM File Descriptions
Icon Name (File Name) Description Page
AutoInstall
(AutoInstall.exm)
Installs cab files in the AutoInstall folder, ensuring they persist
through hard resets.
6-4
Autorun
(Autorun.exm)
Specifies the software applications to be launched after each hard
reset.
6-1
CameraDemo.exm
Specifies the configuration settings for the Camera Demo.
DemosMenu
(DemosMenu.exm)
Specifies the menu for the Honeywell Demos window.
Demo RF Settings.exm
(DemoRfSettings.exm)
Specifies the IP Address and TCP Port used by the Imaging Demo,
Scan Demo, IQ Imaging Demo and the Signature Capture Demo.
DeviceConfig
(DeviceConfig.exm)
Contains terminal configuration settings. 7-1
EZConfig Menu
(EZConfigMenu.exm)
Specifies the menu for the Honeywell EZConfig Utilities window.
EZ Pairing
(EZPairing.exm)
Specifies the configuration settings for EZ Pairing. 11-2
ImageDemo
(ImageDemo.exe.config.exm)
Specifies the configuration settings for the Imaging Demo.
ImagingProfiles.exm
Specifies imager configuration profile used for custom application
development. For detailed information, refer to the Honeywell SDK for
Windows Embedded Handheld available for download from
www.honeywellaidc.com.
IQImageDemo
(IQImageDemo.exe.config.exm)
Specifies the configuration settings for the IQ Imaging Demo.
Network Menu
(NetworkMenu.exm)
Specifies the menu for the Honeywell Network Utilities window.