Filter
Top Products
12 - 2
To Disable Keyboard Status
Navigate to the Power Tools Main Window (see page 1-1), then tap the Keyboard Status icon once.
NoSIP
NoSIP toggles the Soft Input Panel (SIP) between enabled (on) or disabled (off). When NoSIP is enabled, the SIP (virtual key-
board) does not automatically pop-up over application windows and the SIP icon, or does not appear in the Tile bar on
the terminal screen.
To Enable NoSIP
Tap the NoSIP icon once to initialize NoSIP.
Note: To disable the SIP automatically after each hard reset, enable the NoSIP Program section of the Autorun.exm File
(see page 6-1).
To Disable NoSIP
Navigate to the Power Tools Main Window (see page 1-1), then tap the NoSIP icon. Select Yes to close the application.
Reboot
Tap the Reboot icon and then select Warm Boot to perform a Soft reset when:
• the terminal fails to respond,
• after installing software applications that require a re-boot, or
• after making changes to certain system settings, such as network cards.
Note: Refer to the terminal User’s Guide for additional information on the methods and types of resets supported by your Dolphin
model.