Filter
Top Products
6 - 3
Multiple options can be specified for each category. For example, you can specify both 35KEY and 43KEY options to
request that the program run in either a 35- or 43-key keyboard terminal. Separate multiple options with commas.
To ignore a category, do not specify any of its options.
Applying Startup Options to the Autorun.exm File
For each category, Autorun validates each startup option specified in the StartOption key. If no specified option is valid in a
category, Autorun does not execute the program. If at least one of the specified options is valid in each category evaluated,
the program is executed.
To always execute a program, specify no options in the StartOption key.
BATCH
The terminal is a batch unit (no RF or internal modem cards installed).
Mobility
RF
The terminal has an RF card installed (e.g., Cisco 802.11b).
GSM
The terminal has a GSM radio.
BT
The terminal has a Bluetooth radio.
MODEM
The terminal has an internal modem card installed.
IMAGER
The terminal has an imager installed.
Scanner
LASER
The terminal has a laser scanner installed.
BLIND
The terminal has no laser or imager installed.
ANYSCAN
The terminal has either an imager or a laser scanner installed.
RFON
The RF radio is Enabled.
Radio
GSMON
The GSM radio is enabled.
BTON
The Bluetooth radio is enabled.
RFGSMBTOFF
The RF, GSM, & Bluetooth radios are disabled.
xxKEY
The terminal has a xx-key keyboard.
Note: Input the key quantity in place of “xx” in xxKey (e.g., 29KEY, 56KEY
or 30KEY).
Keyboard
NO_KEY
The terminal has no keyboard.
PNPID
The terminal has a card installed whose identification contains ALL of the
strings specified in the PNPID setting.
Expansion Card
NONPNPID
The terminal doesn’t have a card installed whose identification contains
ALL of the strings specified in the PNPID setting.
Option Name The program launches if …
Category