Filter
Top Products
8 - 4
On the Input tab, select PRINT from the drop-down list and tap Execute. The Output tab appears displaying the network
routing table.
Add
This selection adds a route.
1. On the Input tab, select ADD from the drop-down menu.
2. Specify the range of IP addresses to which this rule will apply using the Destination and Netmask fields.
For example, the settings below specify an address range from 300.300.0.1 to 300.300.255.254.
3. Enter the Gateway.
4. Enter the Metric (not required).
5. Enter the Interface (not required).
6. Tap Execute. The system verifies your results and the Output tab lets you know if your entry was added successfully.
Delete
You can delete active routes.
1. On the Input tab, tap DELETE.
2. Enter the IP address in the Destination field.
3. Tap Execute. The system processes the request and displays how many routes were deleted.
Clear
Executing this command clears routing tables of all gateway entries.
On the Input tab, tap CLEAR and tap Execute. The system processes your request and the number of entries deleted
appears on the Output tab.