Filter
Top Products
7 - 4
EAP Method
Available EAP methods for IEEE 802.1X and
WPA(2)-Enterprise (EAP) association modes.
• LEAP
• PEAPv0-MSCHAPV2
• PEAPv1-MSCHAPV2
• PEAPv1-GTC
• PEAPv1-TLS
• FAST-MSCHAPV2
• FAST-GTC
• FAST-TLS
•TLS
• TTLS-MD5
• TTLS-MSCHAPV2
•TTLS-GTC
PSK
Enter the private share key for the WEP
association mode.
User-defined
Identity
This is the 802.1X identity supplied to the
authenticator. The identity value can be up to 63
ASCII characters and is case-sensitive.
User-defined
Password
This is the password used for MD5-Challenge or
LEAP authentication. It may contain up to 63
ASCII characters and is case-sensitive. Asterisks
appear instead of characters for enhanced
security.
User-defined
Anonymous ID
Enter the anonymous ID. This ID creates a tunnel
through which the real ID (as entered in the
Identity field) can pass.
For additional security, make this ID different than
the one entered in the Identity field.
User-defined
Tunnel PAC
Machine PAC
For EAP-FAST, a one-time provisioning
exchange establishes a shared secret, called a
Protected Access Credential (PAC) Key. That
PAC Key is used for all subsequent
authentications.
Enter the address on the
Dolphin terminal of either PAC
(tunnel or machine).
Note: The PACs must be
located on the Dolphin
terminal!
Provisioning
Provisioning refers to service activation and
involves programming various network
databases with the customer's information.
• No Provisioning
• Anonymous
• Authenticated
• Anonymous + Authenticated
CA and/or Client
Certificate
CA certificates are any certificates created by a
certified authority (CA).
Client certificates contain information that
identifies the user, as well as information about
the organization that issued the certificate. This
ensures that you can encrypt data end-to-end.
Enter the address on the
Dolphin terminal of either
certificate (CA or Client).
The certificates must be located
on the Dolphin terminal!
Private Key
Private keys are used with certain types of EAP
authentication.
Enter the address on the
Dolphin terminal of the private
key.
The private key must be located
on the Dolphin terminal!
Key Description Available Values