Filter
Top Products
7 - 2
ActiveSync Section
The ActiveSync Section configures the terminal’s ActiveSync connection parameters. Double tap or click on any Key to
get full information or to edit the settings.
Note: The Connection values must be typed exactly as they appear in the Description field, e.g., ‘115200@Desktop.
Beam Section
The Beam section enables and disables the IrDA port.
Note: Not all Dolphin products/models are equipped IrDA capabilities. Consult the User’s Guide for to see if your
terminal is equipped with an IrDA port.
Radio Manager Section
In the Radio Manager, typically, you would enable the radio in the WiFi section, enable DHCP in the TCPIP section,
then configure the radio settings in the Security\Supplicant\Profile section.
Bluetooth Section
The keys in this section enable the Bluetooth radio and configure a Bluetooth printer as a Favorite. Double tap or
click on any Key to get full information or to edit the settings. If there is no Bluetooth radio installed in the terminal,
disable this section.
Bluetooth Default Printer Values
In general, to establish a printer as a Bluetooth Favorite Device, you must establish the printer as a Bluetooth
Favorite on the terminal. The Default Printer section stores these settings permanently in the DeviceConfig.exm
file so the printer remains a Favorite.
You can distribute a DeviceConfig.exm file with the printer settings to multiple terminals. After DeviceConfig.exe
applies the settings in the DeviceConfig.exm file (launched manually or after a reboot), the printer is set up as a
Favorite automatically, without any special configuration to each terminal.
After you have established a printer as a Bluetooth Favorite Device on an individual terminal, obtain the value for
the Address key from the registry in RegEdit.
Obtaining the MAC Address
After you have set up the Bluetooth printer on the terminal, use RegEdit to find the printer values.
1. Tap Start > Power Tools > RegEdit.
2. Navigate to HKEY_LOCAL_MACHINE > Software> Microsoft > Bluetooth > Device > [MAC Address].
3. Copy the name of the subsection; this is the MAC address of the printer.
4. Enter this address in the Address key in the Bluetooth > DefaultPrinter section of the DeviceConfig.exm
file.
WiFi Section
The keys in the WiFi section control the settings of the WLAN radio. Double tap or click on any Key to get full infor-
mation or to edit the settings.
TCPIP Section
The keys in the TCPIP section determine how the radio handles IP addresses. Double tap or click on any Key
to get full information or to edit the settings.
Security Section
The Security section has no keys and one child section named “Supplicant,” which contains several profile
subsections.
Supplicant Section
The Supplicant section consists of a number of child sections. The default child section is named Profile1 and
contains all the keys necessary to create a configuration profile for the WLAN radio.