Filter
Top Products
5 - 1
5
EZConfig Client
Overview
EZConfig Client decodes bar codes created in EZConfig Editor and deploys the data in the terminal. In addition, if the EXM file
in the bar code is associated with an application, EZConfig Client launches that application, which then processes the decoded
data.
EZConfig Client decodes bar codes with 40-bit and 128-bit encryption.
Accessing EZConfig Client
On the Dolphin terminal, tap Start > Power Tools > EZConfig Utilities > EZConfig Client .
The EZConfig Client Screen
Note: Bar code decoding in EZConfig Client is compatible with ScanWedge. You can set ScanWedge to pass bar code
information to EZConfig Client for further processing.
Field Description
Package ID
Displays the package ID assigned by the EZConfig Editor
Status
Indicates the decode status of the bar codes scanned. If there is more than one bar code in the
package, the field acts as a decode counter indicating; how many bar codes have been scanned
and how many codes are in the package.
Read # Box
Displays a list of the bar codes scanned and decoded.
Accept Unsecured
If enabled (checked) the EZConfig Client scans bar codes that are not encrypted.
Note: By default, all bar codes created in EZConfig Editor are encrypted.