Filter
Top Products
Security 12-13
The procedure for creating and maintaining filter sets is as follows:
1. Add a new filter set.
2. Create the filters for the new filter set.
3. View, change, or delete individual filters and filter sets.
The sections below explain how to execute these steps.
Adding a filter set
You can create up to eight different custom filter sets. Each filter set can contain up to 255 filter rules, in any
combination of input or output.
To add a new filter set, select Add IP Filter Set in the IP Filter Sets screen and press Return to go to the Add
Filter Set screen.
Note: There are two groups of items in the Add Filter Set screen, one for input filters and one for output filters.
The two groups work in essentially the same way, as you’ll see below.
IP Filter Sets
Display/Change IP Filter Set...
Add IP Filter Set...
Delete IP Filter Set...
Return/Enter to configure and add a new Filter Set
Set Up IP Filter Sets (Firewalls) from this and the following Menus.