Filter
Top Products
Utilities and Diagnostics 13-5
The Telnet client screen appears.
■ Enter the host name or the IP address in dotted decimal format of the machine you want to telnet into and
press Return.
■ Either accept the default control character "Q" used to suspend the Telnet session, or type a different one.
■ START A TELNET SESSION becomes highlighted.
■ Press Return and the Telnet session will be initiated.
■ To suspend the session, press Control-Q, or whatever other control character you specified.
Two new options will appear in the Telnet screen (not shown):
Resume Suspended Session – select this one if you want to go back to your Telnet session
Terminate Suspended Session – select this one if you want to end the session
Trace Route
You can count the number of routers between your Netopia Router and a given destination with the Trace Route
utility.
Select Trace Route in the Statistics & Diagnostics screen and press Return to go to the Trace Route screen.
Telnet
Host Name or IP Address:
Control Character to Suspend: Q
START A TELNET SESSION
Enter the IP Address/Domain Name of a host.