Filter
Top Products
Setting up your Router with the SmartStart Wizard 3-13
Note: You can also use these instructions to configure other computers on your network to accept IP addresses
served by the Netopia R310.
Static configuration (optional)
1. Go to the Apple menu. Select Control Panels and then
TCP/IP.
2. With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Basic and click OK.
3. In the TCP/IP window, select “Connect via: Ethernet” and
“Configure: Using DHCP Server.”
If you are manually configuring the computer on your Local
Area Network for a fixed or static IP address, perform the
following:
1. Go to the Apple menu. Select Control Panels and then
TCP/IP or MacTCP.
2. With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Advanced and click OK.
Or, in the MacTCP window, select Ethernet and click the
More button.